Upgraded RUIXIN PRO RX-008 Skilled Knife Sharpener with 10 Whetstones, 360° Rotation Flip Design Fastened-Angle Stainless Metal Kitchen Chef Knife Sharpening Equipment Abrasive Holding System Instruments
Original price was: $41.99.$35.99Current price is: $35.99.
Worth: $41.99 - $35.99
(as of Feb 04, 2025 00:47:30 UTC – Particulars)
Product Description
Tip:
1. Put a couple of drops of honing oil on the corundum stone earlier than use. If honing oil is unavailable, kerosene, lubricating oil, or cooking oil can be utilized as a substitute.
2. After use, please wipe off the pulp and place the stones in a dry surroundings, keep away from excessive temperature and damp.
*On this approach, the sharpening stone won’t produce mud simply throughout use, immune to put on and lengthy lasting.*
–
Bundle Checklist:
1 * Sharpener Bracket
10 * Sharpening Stones
1 * Guide
–
Extra Selections:
We additionally present extra whetstones and sharpeners with different kinds of whetstones for you, you’ll be able to click on the merchandise under to purchase them straight.
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Buyer Critiques
4.4 out of 5 stars
293
4.4 out of 5 stars
174
4.0 out of 5 stars
844
4.1 out of 5 stars
155
Worth
$15.99$15.99 $24.99$24.99 $39.99$39.99 $44.99$44.99
【G-Clamp with Most Tightness】 With a G-Clamp tightly clamping on the desk, stool, kitchen range or different platforms, this RX-008 Metallic Fastened-angle Edge Sharpener might be tightly clamped, and a steel blade fixture holding the blade firmly and safely. A lot of the materials of this sharpener is chrome steel, extremely sturdy & lengthy lasting.
【360° Rotation Flip Design】 Our enhanced knife sharpener equips with an progressive flip fixture construction, permitting you to flip over your blade and sharpen the opposite aspect with a deviation of +/- 2°. You’ll be able to unscrew the screw on the vertical rod to regulate the angle you need shortly and safely. Consideration! In case your cellphone has no rangefinder device to assist set the correct angle, please obtain Measure APP.
【Security】 We perceive the significance of security when coping with sharpening instruments, your buy constructed with a security design–the deal with is on the above of the knife blade, it would by no means damage your hand if you push backwards and forwards the stone to sharp your knife.
【10 Premium High quality Whetstones】 This Edge Sharpener Professional RX-008 Knife Sharpening Equipment comes with 10 whetstones: 180#, 400#, 800#, 1500#, 2000#, 3000#, 120#, 320#, 600#, 1500#. The smaller grit, the rougher floor, appropriate for repairing a variety of knives and instruments, restoring Outdated/New knives. The upper grit, the smoother floor, may help to shine your knife, fantastic grinding, very sharp blades. Stones are all exhausting sufficient to grind S30V metal.
【Multipurpose Use】 Good for sharpening totally different sorts of knives: serrated edge, kitchen, looking, chef, meat, paring, sushi or barbecue and even to hone: scissors, chisels and razors. Your blade will get a razor-sharp edge simply in a couple of seconds!
【Assure】 In the event you obtain the damaged stones, please contact us, we offers you the alternative, don’t fret!
Prospects say
Prospects discover the knife sharpener efficient and produces good outcomes. They are saying it really works nicely and is an efficient starter set for sharpening knives. Nonetheless, some prospects have reported points with the stones breaking simply, being of questionable high quality, and never locking in correctly. Additionally they dislike points with angle retention, holder stability, and screw looseness. Opinions differ on ease of use and worth for cash.
AI-generated from the textual content of buyer opinions
11 reviews for Upgraded RUIXIN PRO RX-008 Skilled Knife Sharpener with 10 Whetstones, 360° Rotation Flip Design Fastened-Angle Stainless Metal Kitchen Chef Knife Sharpening Equipment Abrasive Holding System Instruments
Add a review
Related Products
Original price was: $41.99.$35.99Current price is: $35.99.
Git-r-pic-r –
Very good product at a great price
All my kitchen knives are kept sharp, with this device I can take them to extremely sharp to just plain ludicrous! It takes a while to learn how to achieve the best possible edge, but once mastered the results are remarkable. The over all quality and construction is very good and should last a long time with proper care. Beware, changing stones should be done over a table, they are long and thin and will not survive a fall to the floor. Note: ludicrous level will actually shave hair off ones skin, but is not good for kitchen use as the edge will fold easily and go dull. Very hard knives take a bit longer, but the edge lasts a long time.
Cbtmp –
Seems like a good sharpener with 1 exception
Built well for price and does a good job sharpening. The major negative is that the stones are cheap and they don’t lock in to the holder well (no indention in stones so wont clip into the metal clips ..1 already fell out and broke in half!
5 Star Ace –
Great sharpener but lacking in set up directions
Overall works great. I bought the metal upgrade swivel for this do to some complaints on longevity on original swivel. I can’t attest to that because I upgraded it right away and kept nylon swivel as a back up. I usually use a wet stone and hand sharpen by feel and eye. However, that can be tricky and time consuming. This hasn’t sped up the process that much for me, but it does keep a consistent angle for the knife bevel.I also bought a competitor diamond stones with similar size plates. They actually fit the RUIXIN PRO RX-008. I chose diamond plates for when I need to re-bevel and shape a severely chipped or dull blade.The stones are not bad but those are better for maintenance sharpening and upkeep. Where as diamond allows you to reshaping and re-bevel really dull blades.The key to sharpening is that you have to shape primary edge first then Secondary edge (cutting edge) last. I could be using the edge names backwards, however, the point is for extreme sharpness do as follows:1. Make sure blade is straight, not bent.2. Thin out main edge a little. To do this pick a flatter angle than cutting edge angle. For instance let’s say you want a 17 degree cutting edge. On this step you sharpening or thin to a 10 degree angle.3. Now that step 2 is done you increase angle to 17 degrees and sharpen. What I do is clamp down blade and bevel edge evenly until my nail catches a burr on opposite side of blade. Then I unscrew the blade turn over and repeat.Depending on the dullness of the blade will determine what grit to start with.If your knife is really dull you want to start at lower grits and slowly move up to next grit. At the very end use a flat strop or straightening chef hone. This will remove small burrs and straighten the cutting edge (pretty much microscopically). If you can see the burr with the naked eye that is not good.Also, One last thing do not use the clamp swivel clamp for sharpening (meaning pick a side to use. ) personally I chose hexagonal (allen wrench screws up). Even though this increases the sharpening time, it does two things for you, keeps same angle, if you flip clamp angles are different. So unscrew blade and manually flip blade and re-clamp. This Keeps you safer and keeps same angle. Because if that spring loaded part were to give out while you are pivoting it you could severely cut yourself. The swivel is for choosing an angle not for flipping and keeping same angle. If the design is for that than I’m sorry it will not work as intended. That being said as long as you manually flip blade and re-clamp you’ll be good with this.
Dean B. Adam –
Nice but takes practice.
Tried this out for the first time tonight. Love the concept but I’ve never sharpened knives in my life and while I’m super handy, it did take some practice to get it right. Easiest was touching up the edge on a basically new knife. Getting a 10 year old cheap paring knife sharp is going to take more work. A few design improvements I’d recommend. The grip for the stones seems scary. I’m constantly waiting for them to fall out. Nothing really holds them in other than a little spring pressure. One of my stones arrived broken and another only just fits in. Super sketchy to use. I’d imagine the thinner diamond plates fit perfectly. The rubber grip seems to slide around a bit. Wasn’t an issue but imagine it could be. I don’t get why the grips for the knife blade are Allen keys! That is a total faff vs something else you could tighten with your fingers and wouldn’t wear/strip over time. Generally feel it’s a useful tool that helps you do something hard to do without it, thought it was good value for money, but see how it could be better.
Helmar –
Wow. Major impressed.
I was really impressed with the quality of this.Came with good instructions and again, Very well built.I also found several videos on line that helped in the setup and getting the angle correct.More than pleased 🙂
Scott –
Do Not Purchase! Horrible prouct!
I used this on two knives. It broke on the first one, but I tried working it out to make it through. First the instructions are terrible. I could make it past that because the process of sharpening knives isn’t too difficult. As soon as I started using the sharpener, two screws started stripping. The screw holding the guide rod to the unit that holds the stone stripped and wouldn’t maintain the position needed for sharpening. I even tried super gluing the rod in place and it held long enough for me to finish the two knives I was working with, then it came undone. Two of the stone provided cracked in half just by attempting to use them. The instructions show stones attached to a base piece that fits in the handle piece. None of the stones came in with the base attached and there wasn’t any base pieces provided. Long story short, none of the retaining pieces can be screwed in to maintain specific angles, none of the screws that hold things in place work because they strip out also. The stone provided are cheap and break apart with very little pressure, let alone day to day application. PLEASE, DO NOT PURCHASE THIS CHEAP HUNK OF JUNK! I’ve purchased two of these units, the first one lasted about two months before it broke apart and was useless. I figured it was user error and purchased a second sharpener, same type, but more expensive. I thought I would get more for the extra money. This one was broken within five minutes of use. TERRIBLE PRODUCT AVOID IT LIKE THE PLAGUE!!!
JESUS DIAZ –
Llegaron 2 piedras quebradas, las de mayor desgaste, el resorte que hace presión para que no se caigan las piedras parece que viene vencido.
Dan Downey –
This setup works very well I have sharpened 8 to 10 knives already and they are razor sharp now. The stones do not sit well in the pressure fitting and one has fallen out and broken already in only a few days use
Factory Presets –
Not as good as the videos. But realistically does a very nice edge. Recommended.
Fec63 –
Whetstone too soft and get worn easily but can be replaced with diamond ones. Gadget is good with ease of flipping knife. Needs greasing on balljoint for smooth operation. Value for money.
Jane Smith –
This sharpener is excellent and easy to use. It gives a consistent edge along the length of the blade. Highly recommend.