Two-in-one Blue Guide Slicing Can Opener for Beer, Iced Espresso, Soda, Canned Wine & Cocktails, Power Drinks Can High Remover for 8-19 Oz Beverage Cans, Family Bar Instrument
$8.66
Worth: $8.66
(as of Feb 12, 2025 04:57:57 UTC – Particulars)
Multifunctional bar dwelling can opener with sharp blade and clean chopping opening, the revolutionary design can safely take away the residue within the can, and there shall be no aluminum wire falling, guaranteeing your well being and security. Appropriate for aluminum canned beer, soda, power drinks, canned wine and cocktails, iced espresso. And the center stainless Metal flat bottle openers can be utilized glass bottles of beer, soda, and so forth. Excellent for household and mates gatherings, tenting, outings and on a regular basis use. Characteristic: 1. The newly upgraded skilled handbook bottle can opener is extra labor-saving than comparable merchandise in the marketplace. 2. Two-in-one, you may open each beer bottle caps and pop-top can caps. 3. Upgraded a can opener has sharp blades and clean chopping openings with out aluminum chips. 4. Excellent for household and mates gatherings, tenting, outings and on a regular basis use. Discover Please comply with the right steps when opening the cans. Don’t shake the beverage can earlier than opening to keep away from bubbles. Clear the can opener after every use.
Clients say
Clients discover that the can opener leaves a pointy edge that’s unclean and burrs. They discover it unusable and impractical.
AI-generated from the textual content of buyer critiques
8 reviews for Two-in-one Blue Guide Slicing Can Opener for Beer, Iced Espresso, Soda, Canned Wine & Cocktails, Power Drinks Can High Remover for 8-19 Oz Beverage Cans, Family Bar Instrument
Add a review
Related Products
$8.66
Ian Georges –
Don’t know
Great
Kimberly Reid –
Leaves sharp edge that will cut your mouth off!!
This product is impractical and unusable as it leaves the edge sharp instead of folded down and smooth. Very dangerous!!
Dakotah –
Removes the top
It works for the purpose I bought it for (removing the top to be recycled separately from the rest of the can). But it could be sharper. Doesnât cut very smooth, sometimes leaves some sharp or jagged edges. I wouldnât recommend drinking out of a can after using.
Lori Pullen –
Did the job of removing top of soda can
It took us a while to get the hang of using this (especially since we have small hands). A bit hard to squeeze with small hands. Also, itâs much easier to pull the top of the can off if you pull it with this tool. We originally used the tool to cut the top and then used our hands/fingers to pull the lid off. Once we figured it out, it was well worth the purchase. Weâve cut over 50 cans and itâs still cutting just as good as when we cut the first can.
Karsyn –
Can opener
Love the concept of this can opener but it does not fully cut the can top off and leaves rough edges. In comparison to the cost it isnât awful but wasnât my favorite purchase.
Lynn Shank –
Did not cut the lid well
My return this as each time I tried to cut a lid off it left a lot of places that were uncut. Eventually it was very rough around the edge and not good to drink from
-Axel –
Inexpensive can cutter for de-lidding cans on a solar-heater project
This took me over a month to receive for some reason, but it was worth it.This was a great can cutter for removing the lids off of cans for use in a solar-heater project.Combine this tool with a 1-3/4″ hole saw and silicone the cans together, paint them black and set them inside of a 3″ deep fixture with 1/16″ plexiglass on the front and 1/8″ backing, with a 120mm hole on the top and bottom to push the air.Also look into an 120mm AC Infinity fan system to complete the project.Would recommend.
Hunter –
Cuts ok but
I bought this used it once and bought the name brand one this one leaves the can very sharp and where you start it makes two sharp points not good if you plan to drink from it